Swordfish 240a Pro + waterproof 4-12S Data logger

Swordfish 240a Pro + waterproof 4-12S Data logger

$425.00 AUD

Add to Cart:

Category: Swordfish ESCs

Hifei Swordfish Pro+ 240 amp high voltage water cooled esc with Data Logging.

This is a high quality ESC designed specifically for racing boat. With the new data logging feature, you will be able to take the guess work out of prop, motor or strut changes by logging the following info, Current/Amps, Voltage, Temperature, RPM, Power & Throttle travel. Programing can be done with optional program card, USB adapter (Requires Windows xp, Vista or Win 7(will not work on Windows 8) or optional LCD Program Box/Handheld Unit.

Up to 38 NiCad/NiMh cells or 4s to 12s LiPo. This unit is encased in rubber, making it very water resistant.
Microprocessor controlled
Extremely low resistance (0.00075 ohm)
240A continuous (300 Burst)
Up to 38cells NiMH/NiCad or 4 to 12 cell Lithium-polymer
High rate adjustable switching (PWM:8KHz/12KHz/16KHz)
No BEC(battery eliminator circuit)
Programmable low voltage cutoff
Programmable cutoff types(soft cutoff/hard cutoff)
Timing advance programmable (low/standard/high)
Programming by Hifei Program Card or USB Linker
Firmware Upgradeable
Programmable startup type(very soft start/soft start/fast start)
Thermal Protection(100 centigrade)
Runs motor in forward or reverse by swapping any two motor wire connections.
Safe “power on” arming program ensures motor will not accidentally turn on.
Auto shut down when signal is lost or radio interference becomes severe for more than 3 seconds .After radio connection has been reestablished, moving the throttle to the lowest position can restart the motor.
The ESC is disabled when the voltage is over 51v at power-on.
Data Logging Feature Includes, Current, Voltage, Temperature, RPM, Power & Throttle travel (These features require optional USB adapter, downloading/installing the software and you to supply a windows pc.
Case Measures: 4.25 (108mm) x 2.25 (57mm) x .90 (23mm)
Weights: 310g

Requires:
Connectors for both the motor and battery supply end. We recommend 8.00mm bullet connectors.

Also requires a rx battery pack or external bec to power your receiver.

USB programer requires Windows XP, Vista or 7(will not work with windows 8)

  • Manufactured by: Swordfish

This product was added to our catalog on Thursday 24 May, 2012.



Your IP Address is: 54.162.164.247